Year: 2026
-
Zendure SolarFlow 3000 AC+ efficiency: measurements and tips
Why this data My Zendure SolarFlow 3000 Mix AC+ converts AC to battery and back at 93–94% at its best (1–2 kW), but below about 250 W of charging or 150 W of discharging it drops under 80%. Two full cycles measured from AC in to AC out returned 86.7% at 1.5 kW and 84.2%…
-
Same IP for all network interfaces on the Q1 Pro
How to connect to the Q1 Pro using the same IP, no matter whether it’s connected via Wi-Fi or Ethernet. These instructions (but not the article text) have been generated via ChatGPT and then tested on a Q1 Pro running FreeDi (Armbian bookworm). They are published here for easier retrival via links in discussion forums…
-
How To Avoid Dry Nozzles on Inkjet Printers
Inkjet printers dry out easily, leave them a month unused and you might need an expensive (and not always successful) nozzle cleaning procedure. This article provides a suggestion to solve the problem without requiring much user intervention. These instructions (but not the article text) have been generated via ChatGPT. They are published here for easier…
-
Upgrade The Moonraker Database
My Qidi Q1 Pro was originally running a very old stack of Klipper, Moonraker and operating system, so when I needed new features not available on such an old stack, I decided to upgrade the printer to FreeDi, an alternative stack with support for the integrated display, otherwise not supported by Klipper natively. The procedure…