Tag: ai-content
-
Simulating a Home Battery in Home Assistant: My Strategy
Why a virtual battery Before I owned a home battery, I wanted to know what one would actually save me in my house, with my solar panels and my consumption. Datasheet round-trip efficiencies and generic calculators were not good enough for that, so I simulated a battery inside Home Assistant with the battery_sim integration and…
-
Zendure SolarFlow 3000 AC+ Efficiency: Measurements And Tips
Why this data My Zendure SolarFlow 3000 Mix AC+ converts AC to battery and back at 93–94% at its best (1–2 kW), but below about 250 W of charging or 150 W of discharging it drops under 80%. Two full cycles measured from AC in to AC out returned 86.7% at 1.5 kW and 84.2%…
-
Same IP For All Network Interfaces On The Q1 Pro
How to connect to the Q1 Pro using the same IP, no matter whether it’s connected via Wi-Fi or Ethernet. These instructions (but not the article text) have been generated via ChatGPT and then tested on a Q1 Pro running FreeDi (Armbian bookworm). They are published here for easier retrival via links in discussion forums…
-
How To Avoid Dry Nozzles on Inkjet Printers
Inkjet printers dry out easily, leave them a month unused and you might need an expensive (and not always successful) nozzle cleaning procedure. This article provides a suggestion to solve the problem without requiring much user intervention. These instructions (but not the article text) have been generated via ChatGPT. They are published here for easier…
-
Dangers From 3D Printing ABS. A Myth?
How high are the actual emissions, once all factors are taken into account and compared with normally accepted thresholds?